Material Handling

Details

Manual and powered pallet trucks support short-distance movement of palletised goods between receiving, storage and production areas. Stackers add controlled lifting for load placement and transfer where a pallet truck alone is insufficient. Selection starts with the pallet format, loaded weight, travel distance and available aisle space. Fork dimensions, wheel material, lift height and the battery or charging arrangement must match the application. Fork-over and straddle configurations suit different pallet constructions. Supply enquiries can include complete trucks, compatible chargers and model-specific wear parts, with the equipment specification reviewed against the intended handling task.

For selection: Load weight and centre; Pallet underside and fork entry; Travel distance and floor conditions; Aisle width and turning space; Required stacking height; Electrical supply for charging

Details

Lift tables, pallet levelers and turntables bring materials to a suitable working height for assembly, packing and component handling. Options include mobile scissor-lift tables, powered stationary tables and rotating pallet positioners. Lift-and-tilt arrangements can improve access to parts in containers where the load and application permit. Specify the load distribution as well as total weight, because an off-centre load can affect the permitted capacity. Platform dimensions, lowered height, lift travel and operating frequency guide product selection. Enquiries can also cover compatible controls, guards and model-specific hydraulic replacement parts for existing equipment.

For selection: Distributed and concentrated loads; Platform size; Lowered and raised height; Cycle frequency; Loading method; Available power

Details

Chain hoists, lever hoists and powered lifting units support maintenance, assembly and movement of suspended loads. Manual, electric and pneumatic options suit different lifting frequencies and available utilities. Beam trolleys allow compatible hoists to travel along a suitable supporting beam, while selected clamps and load attachments connect equipment to the intended task. The required working load, lift height, headroom, duty classification and control method must be checked together. Replacement chains, hooks, brakes and control parts require an exact OEM match. Structural suitability and the complete lifting arrangement remain subject to the responsible engineer and applicable inspection requirements.

For selection: Working load and load geometry; Lift height and headroom; Duty and starts per hour; Beam flange profile; Voltage or compressed-air supply; Required equipment documentation

Details

Industrial conveyor modules move parts, cartons and containers through packing, inspection and assembly operations. Belt, modular-plastic-belt and roller arrangements are selected around the item size, underside, weight and required movement. Straight sections, compact transfers and accumulation modules can be specified for a defined production interface. Belt surface, guide arrangement and frame material depend on the product and operating environment. The quotation should identify speed, throughput, transfer height, available power and control interfaces. Replacement belts, rollers, bearings and drives can be matched to existing equipment. Airport baggage-handling products remain within the existing Mechanical category.

For selection: Product dimensions and underside; Maximum unit load; Speed and throughput; Conveyor length and elevation; Washdown or ambient conditions; Control-interface requirements

Details

Drum handling equipment supports movement, lifting, rotation and controlled pouring of industrial containers. Product options include drum trucks, wheeled lifters, drum rotators and compatible forklift or below-hook attachments. Selection depends on the drum construction, diameter, height, rim profile and filled weight; a handler suitable for one drum type may not suit another. Pouring height, rotation method and the need to retain a partly filled drum also affect the choice. Replacement gripping components, wheels and hydraulic parts must match the equipment model. Requests should identify the contents and operating environment so the OEM can assess material and application compatibility.

For selection: Drum material and rim type; Diameter and height; Full and partial drum weight; Lift and pouring height; Contents and environment; Host forklift or hoist details